Enumeration Points
Enumeration points have 6 alarm types (Alarm 1 through Alarm 6). Alarm 6 has the highest precedence. The alarms are listed in the table below in order of precedence. See the PNT Editor - Enumeration Page for configuration information.
| Alarm | Alarm Calculation Type | Calc Value 1 | Calc Value 2 | Alarm Color | Configurable Bit | |
|---|---|---|---|---|---|---|
|
Alarm 6 |
Setpoint Value |
N/A |
|
Red |
06 |
|
|
Alarm 5 |
Setpoint Value |
N/A |
|
Red |
05 |
|
|
Alarm 4 |
Setpoint Value |
N/A |
|
Yellow |
04 |
|
|
Alarm 3 |
Setpoint Value |
N/A |
|
Yellow |
03 |
|
|
Alarm 2 |
Setpoint Value |
N/A |
|
Red |
02 |
|
|
Alarm 1 |
Setpoint Value |
N/A |
|
Magenta |
01 |
|
Default alarm colors may determine which alarms you use.
Example
If you have a setpoint that represents an "alarm" condition, you may want to use alarm 2, 5, or 6 since the default color of these alarms is red.
Alarm setpoints must match an enumerated value. Enumeration alarm setpoints are case-sensitive.
